Wireless Charging Case Compatible with Air Pod 1st & 2nd Generation, Magsafe Charging Case Replacement with Sync Button

The following are steps of pairing:

The following are steps of pairing:

1. Open the Bluetooth on the i-Phone, don't charge the case or have a charging case plugged in when pairing, please put the case close to the phone so that the case can find the phone.

2. Put the Air Pod into the case,open the lid, press the sync button until green light flashes.

3. Now the case is searching the phone, please don't close the case lid.

4. if the pop-up window shows "Not Your Air Pod", just ignore it, please don't click "Connect", otherwise the pairing will fail.When the window shows "Air Pod"or the name you set, please connect.When it shows "Done", don't click it. Firstly, press the sync button and close the lid, then press "Done"

5. Open the case and wait for 2 seconds, when you see the Air Pod are paired with i-Phone, take them out and enjoy your music.

Kindly Note:

1. Don’t click “Connect” when the phone displays”Not Your Air Pod”, otherwise the pairing may fail, please wait until the phone displays”Air Pod”, then click “Connect”
2. When already paired, press the sync button to exit the pairing mode, otherwise, the case will automatically exit the pairing mode 120 seconds later, but the Air-Pods maybe show they aren’t connected.( just click the Air-Pods name on the Bluetooth page to get connected),and the battery percentage displays might jump up and down during this auto exit process.
3. When paired, if one of the Air Pod has no sound, just put both Air Pod into the case, close the lid, after a few seconds, take them out and they’ll work well.
4. The margin of error is 5% for the battery percentage of the case showing on the phone.
5. If the system is iOS, it should be iOS 12.2 or later versions.